Introducing the touchscreen controller
Introducing the touchscreen controller
Every room system comes with a touchscreen controller: the StarLeaf Touch. You use the
touchscreen controller as the means for making and controlling video calls with the room
system. Through the touchscreen controller, you can access the directory and contacts.
You can use the touchscreen controller to create ad hoc conferences, and to add and
remove participants.
Note:
If you are an existing customer using a touchscreen controller with an older user
interface and would like to have the new UI as shown above, please contact StarLeaf
Support.
The figure below shows the features on the front of the StarLeaf Touch.
Table 1:
Front panel features and controls
Button
Description
Audio mute
Toggle the microphone on and off. The button lights when the
microphone is off. When you are in a call and your audio mute is on,
nobody can hear what you are saying (your audio is disabled)
Video mute
Toggle the camera on and off. The button is an LED that lights when the
camera is off. When you are in a video call and the video mute is on,
nobody in the call can see you (your video is disabled)
Home
Press to display the home screen of the touchscreen controller from any
screen in the interface. Double-press to access the touchscreen
controller’s settings
Audio volume
down
Press during a call to decrease audio volume or, if you are not in a call,
press to decrease the loudness of the ringer
StarLeaf room system guide, 24 September 2019
Page 4 of 31