FeatherTouch ASCOM Driver Software Setup June, 2007 Copyright Starlight Instruments Inc. 2007 Preliminary documentation version 1.0
5
It is now possible to test the Focuser
IN/OUT
movement:
If you have performed the setup starting from Maxim DL:
In Telescope control, under the
Setup
tab – Focuser - click on Connect.
Click on the Focuser tab.
Enter a value, say 300 in the Incremental box, and click the Move Out button while watching the
focuser.
After clicking the Move Out button a few times and confirming the focuser movement, try clicking
the Move In button to verify that the focuser moves
IN.
If you have performed the setup starting from FocusMax:
Click on the Jog button in the FocusMax main window.
The Jog Focuser Windows appears:
Enter a value, say 1000 next to the Out button, and click the Out button while watching the
focuser.
After clicking the Out button a few times and confirming the focuser movement, try clicking the
In button to verify that the focuser moves
IN.
