START International TDA025, Instruction Manual

TDA025 INSTRUCTION MANUAL          3

INTRODUCTION

1.  Make sure the ON/OFF switch is turned to the “off” position before you plug the

TDA025 in.

2.  When you load the tape, make sure that the ON/OFF switch is “off”.

3.  The blades are 

very 

sharp. When the TDA025 is in operation, make sure the safety

cover is down.

4.  When there are finger marks, oils, and/or dirt on the carousel, the tape won’t stick

properly so use a dry cloth to clean the carousel.

Note:  

For major cleaning, wipe the carousel off with benzene or alcohol.
(Never clean it with thinner).

5.  To avoid shortening the life of the motor, run the TDA025 

without 

tape as little as

possible.

6.  This is an industrial tape dispenser.  It is not for home use. Do not use around 

children.

7.  The TDA025 can be used efficiently by one or two people. Allow the motor to rest

from time to time.

Thank you for buying our automatic tape dispenser.  The TDA025 can automatically cut
and dispense many types of tape. Before using, please read this instruction manual
carefully.

BEFORE USE