4 TDA025 INSTRUCTION MANUAL
HOW TO SET THE BOBBIN
1. The ON/OFF switch must be “off”.
Note: When not in use, unplug the TDA025.
2. Choose the right bobbin
for the tape
Note: Internal diameter – 25, 32 and 78 mm
Outside diameter – Up to 130 mm
3. Put the tape on the bobbin.
Note: Check the direction of the bobbin, and push the tape to the limit of the
flange.
4. Pull out approximately 100 mm of tape. Put
the bobbin on the tape holder
.
Note: If there is space between the tape
core and bobbin, wrap a piece of tape
around the bobbin to make it fit.
15
69
1. The ON/OFF switch must be “off”. Open the safety cover
. Move the arm
frame
using the manual lever
.
2. Set the blades as if they were
going to “bite” the carousel.
3. Bring the arm frame
away
from the carousel.
42
66
42
14
HOW TO SET THE TAPE
100
MM
T
APE
S
HAFT
F
LANGE
Summary of Contents for TDA025
