START International TDA025, Instruction Manual

TDA025 INSTRUCTION MANUAL          5

HOW TO SET THE TAPE - cont’d

1.  The ON/OFF switch must be “on”.

2.  Press the start switch

on the carousel.  The cut pieces of tape will be distrib-

uted about half way around the carousel.

3.  Before you begin operation, test the process by cutting two or three pieces. Check

the precision length of the cut.

4.  To make the tape feed all the way around the carousel, press the start switch

again.

Note:  Once the carousel is full, be sure to remove the pieces of tape before

you start the TDA025 again or else the tape will overlap.

5.  If the motor overheats, the thermostat will automatically shut the TDA025 off. When

that happens, let the motor cool before further use.

6.  Whenever you open the safety cover       the TDA025 will stop automatically.

2

2

4.  Pull the tape through the blades

and affix the tape to the
carousel.

Note:  When you stick the tape

to the carousel, be sure
to pull the tape all the
way through the middle
of the carousel and affix
firmly.

5.  If you haven’t set the tape cor-

rectly, try repeating steps 1
through 4.

OPERATIONS

14