6 TDA025 INSTRUCTION MANUAL
HOW TO REMOVE TAPE FROM THE CAROUSEL
Begin taking the tape off from the left side of the tape holder
, continue around
clockwise.
15
You can adjust the length and the cut piece
spacing whether the TDA025 is “off” or “on”.
1. Turn the length adjustment knob
to
the desired tape length.
2. Turn the knob for the cut piece spacing
to the desired spacing.
51
19
The blades are consumables, and they will eventually dull. When this happens you
should replace the blades. How long the blades last will depend on the quality and
thickness of the tape you’re using.
1. Remove the spring.
2. Raise the arm frame by using the manual lever
.
3. Pull the arm frame out.
66
1. Remove the 4mm screw.
2. Take off the upper blade.
HOW TO ADJUST THE TAPE
THE BLADES
HOW TO REMOVE THE UPPER BLADE
HOW TO REMOVE THE ARM FRAME
SHORTEN
LENGTHEN
NARROWER
WIDER
CLOCKWISE
REVERSE
CLOCKWISE
REVERSE
Summary of Contents for TDA025
