Windows XP, 2000, ME users:
Use either the Microsoft USB Mass Storage driver
included with your Operating System, or install the driver provided with this card reader.
1.
To use the Mass Storage driver
: Plug the card reader in to any USB 2.0
port. Windows will automatically detect the card reader and install the appropriate
drivers for you.
Note
: If you are using Windows 2000, please make sure you have
the most recent service packs for your Operating System (requires Service Pack 4).
To install the driver provided with this card reader, simply run
SETUP.EXE
located in
the
\ALI\M5635\WIN_DRV\
folder of the included CD, prior to connecting the card
reader to the USB 2.0 port.
Windows 98SE users
: Windows 98SE does not include a USB Mass Storage Driver.
As such, the driver included with the card reader will be required.
1.
Run the
SETUP.EXE
file, located in the
\ALI\M5635\WIN_DRV\
folder of the included
CD, prior to connecting the card reader to the USB 2.0 port.
Mac users:
Driverless for Mac OS 10.1.2 or above
Linux users:
Driverless for Linux OS 2.4.x or above
U
Us
siin
ng
g Y
Yo
ou
urr C
Ca
arrd
d R
Re
ea
ad
de
err
The following table illustrates the designation for each card port on the reader. Be sure
to use the correct slot as indicated, to avoid damaging your Flash Cards or the data that
they contain:
Inserting a Card
1.
Turn on your computer.
2.
Insert your memory card into the proper slot on the card reader, with the top of the
card facing upwards..
3.
Mac users
: A new icon will appear on your desktop.
Windows users
: A new icon will appear in “My Computer.”
4.
The card can now be accessed as an extra disk.
Instruction Manual
3
SLOT A
SLOT B
SLOT C
SLOT D
SMC/Others CF/MD/Others SD/MMC/Others MS/MSPro/Others
