StarTech.com 8STSDOCK1EU3P2, User Manual

10

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

process is complete. If a serial printer is connected to the 

eraser, a receipt prints out.

8. 

To remove the drive, press the 

Eject

 button.

Changing Custom Erase Settings

You can customize the erase settings that are applied when 

you select 

Custom Erase

 in the 

Eraser Mode

 menu, including 

setting the number of passes and selecting a pattern number.

1. 

Use the 

Menu navigation

 buttons on the front of the eraser 

to move up and down in the 

Erase mode

 menu.

2. 

Select 

Custom Erase

 and press the 

OK

 button.

3. 

Do any of the following:

• 

To select a pass number, select

 Setup Pass #

 and press the 

OK

 button. Use the 

Menu navigation

 buttons to select a 

number between 1 and 99 and press the 

OK

 button.

• 

To select a pattern count, select 

Setup Pattern

 and press 

the 

OK

 button. Use the 

Menu navigation

 buttons to select a 

number between 1 and 99 and press the 

OK

 button. Use the 

Menu navigation 

buttons to select a 

Data Pattern

 number 

and press the 

OK

 button. Use the 

Menu navigation 

buttons 

to select a number between 1 and 99. Press the 

OK

 button.

To return to the 

Erase mode 

menu, press the 

ESC

 button until 

you have exited the 

Custom Erase

 settings.

Viewing Eraser Details

The SDOCK1EU3P2 includes a 

Utility

 menu that you can use to 

view information about the eraser, including system and disk 

information.