Introduction
Thank you for buying a StarTech.com ultra-quiet 430-Watt replacement ATX power
supply. The ATXPOW430HS is guaranteed compatible with high-end Intel and AMD
processors and is designed for an extra long-life in personal and industrial computers.
The smart 12 cm ball-bearing fan automatically adjusts its speed to provide whisper-
quiet operation while maintaining optimum cooling. This power supply comes Serial
ATA ready with two SATA connectors.
Features
• Supports Serial ATA drives
• Uses heavy-duty transformer to support PC servers with several hard drives
• Provides the extra current required by 3 GHz and faster CPUs
• Provides extra power required by leading edge 3D video accelerator cards
• Uses quad-protection: Short Circuit protection, Over Power protection, Over Voltage
protection, and No Load protection
• Complies with ATX version 2.03, ATX12V, and Serial ATA 1.0 specifications
• Uses superior EMI/RFI power filtration system to ensure system components receive
clean, stable power
• Backed by StarTech.com’s two-year warranty
WARNING!
Computer parts can be severely damaged by static electricity. Be sure that
you are properly grounded before opening your computer case. StarTech.com
recommends that you wear an anti-static strap when installing any computer
component. If an anti-static strap is unavailable, discharge yourself of any static
electricity build-up by touching a large grounded metal surface (such as the computer
case) for several seconds. Also make sure that your computer is turned off and
unplugged before attempting to open your computer case.
Contents
This package should contain:
• 1 x ATXPOW430HS power supply
• 1 x power cord
2
Installation
Check the red power supply voltage switch before installation. It should be the same as
your local power voltage (115V for North America and 230V for most of the European
countries). Change the voltage setting if necessary.
1. Make sure that your system is turned off and unplugged. Disconnect the power cord
from your old power supply.
2. Open the case (consult your computer’s user guide for details, if necessary).
NOTE
: Before completing the next step, you may want to take note of what devices are
attached to your current power supply so you know which devices need to be connected
to the new power supply and where their connectors are located.
3. Disconnect all power connectors from the motherboard and the peripheral devices
such as hard drives, floppy disks, etc. Make sure that there are no devices connected
to your existing power supply.
4. Remove the existing power supply from your computer case and replace it with the
new StarTech.com power supply.
5. Connect the power connectors to your motherboard and peripheral devices.
6. Close your computer case.
7. Connect the power cord to the StarTech.com power supply.
ATXPOW430HS Connectors
3
+3.3V
+3.3V
+3.3V
Ground
Ground
Ground
+5.0V
+5.0V
+5.0V
Ground
Reserved
Ground
+12V
+12V
+12V
Pin 1
Pin 15
Ground
Tachometer
Serial ATA
TX3
