StarTech.com CONNLOCKPK, Quick Start Manual

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: July 18, 2019

Product Diagram (CONNLOCKPK)

Part

Function 

1

Steel Cable Tether

• Tether 

A/V Cables

 to 

A/V Adapters

2

Aluminum Ferrule

• Create a loop by routing the 

Steel Cable Tether 

through each opening

• Crimp to secure the 

Steel Cable Tether

 loop

3

Heat Shrink Tubing

• Shrink around the crimped 

Aluminum Ferrules

Requirements

• Swaging Tool x 1
• (Optional) Heat Gun x 1
• (Optional) Wire Cable Cutter x 1

For the latest requirements please visit: 

www.startech.com/CONNLOCKPK

. 

Installation

1.  (Optional) Thread the 

Heat Shrink Tubing

 onto the center of the 

Steel Cable 

Tether

.

Note: 

This step is necessary if you plan to utilize the 

Heat Shrink Tubing

. 

2.  Thread the 

Aluminum Ferrules

 onto each end of the 

Steel Cable Tether

.

3.  Wrap one end of the 

Steel Cable Tether

 around the

 A/V

Cable

.

Connectivity Lock - Steel Cable Tether

4.  Route the working end of the 

Steel Cable Tether

 back into the second hole in the 

Aluminum Steel Ferrule

.

5.  Cinch the 

Steel Cable Tether

 until it fits snugly around the

 A/V Cable

.

Note: 

Do not cinch the 

Steel Cable Tether

 down all the way. Cinch the S

teel Cable 

Tether

 until it is no longer possible to slip the loop over the connectors of the 

AV 

Cable.

6.  Crimp the 

Aluminum Steel Ferrule

 in the appropriate fitting of a 

Swaging Tool

. 

(Figure 1)

Note: 

It may be necessary to crimp the 

Aluminum Steel Ferrule 

a few times to create 

a strong and circular shaped crimp. 

7.  Wrap the other end of the 

Steel Cable Tether

 around the cable portion of the 

A/V 

Adapter

.

1

2

3

Figure 1