Instruction Manual
1
Introduction
This high quality Removable SATA Hard Drive Drawer/Mobile Rack delivers a
professional-grade SATA hot-swap solution, allowing you to quickly swap Serial ATA
hard drives in and out of a computer without having to open the computer case.
Simply install the (included) drive bay into a 5.25in drive bay on the host computer,
then mount a 3.5in SATA HDD in the (removable) caddy. Connecting the SATA hard
drive to the computer is as easy as inserting the caddy into the drive bay, which can be
locked to prevent unauthorized removal of the installed SATA drive.
A practical, time-saving hot swap solution, the drive drawer includes Swap Manager
utility software that lets users swap drives in and out of the host computer without
powering down the computer.
A suitable solution for large volume drives, the HDD drawer fully supports SATA, SATA
II and SATA III-6Gbps hard drives, allowing you to swap in large amounts of data in a
matter of seconds. With support for SATA HDD speeds up to 6.0 Gbps, the mobile rack/
backplane is fully compatible with RAID installations to ensure maximum performance
and versatility for enhanced storage applications.
The drive caddy features two front panel ball bearing fans that help keep the enclosed
drive cool, in turn helping to optimize operation while preserving drive lifespan.
To prevent damage to the hard drive(s) while being transferred in and out of the
computer, the drive caddy features shock absorbers and rubber cushioning that help
limit vibration/shock to the drive.
Packaging Contents
•
1 x Drive caddy
•
1 x Drive bay
•
2 x Keys
•
1 x Screw kit
•
1 x Swap Manager software CD
•
1 x Instruction Manual
System Requirements
•
Computer with a 5.25 Inch Drive Bay
•
Swap Manager software requires Microsoft® Windows® XP/ 2000/ Server 2003
•
1 x 7-pin SATA data cable
•
Power Supply with available SATA or LP4 Molex power connector
