Instruction Manual
2
Introduction
Packaging Contents
• 1 x 2.5/3.5in SATA HDD Backplane
• 2 x 18” SATA Cable
• 1 x LP4 to SATA Power Adapter Cable
• 2 x Bay Key
• 1 x Installation Screw kit
• 1 x Instruction Manual
System Requirements
• 1 x Computer System with SATA connectivity and an available 5.25” bay
• 1 x Available SATA or LP4 Power Connection
• 1 x 2.5” SATA Hard Drive
and/or
1 x 3.5” SATA/SAS Hard Drive
WARNING!
Hard drives and storage docks require careful handling, especially when
being transported. If you are not careful with your hard disk, lost data may result.
Always handle your hard drive and storage device with caution. Be sure that you
are properly grounded by wearing an anti-static strap when handling computer
components or discharge yourself of any static electricity build-up by touching a large
grounded metal surface (such as the computer case) for several seconds.
