StarTech.com IDECASE35F, Instruction Manual

2

Introduction

Thank you for purchasing a StarTech.com 3.5” external storage device. Designed for 3.5”
hard drives, this device allows you to quickly connect and disconnect your hard drives,
making data storage, backup, and sharing easier than ever before. The IDECASE35U2
features USB 2.0 capabilities, meaning you’ll experience super-fast data transfer speeds
of up to 480 Mbits/sec. The IDECASE35F uses FireWire technology to reach data transfer
speeds of up to 400 Mbits/sec. With full Plug and Play capabilities, each device is a snap
to install and use.

Features

• IDECASE35U2 transfers data at speeds up to 480 Mbits/sec and is compatible with 

most PC computers

• IDECASE35F transfers data at speeds up to 480 Mbits/sec and is compatible with 

most PC and Mac computers

• Uses compact, lightweight aluminum design for easy storage and portability

• Complies with Plug and Play specifications

• Backed by StarTech.com’s one-year warranty

Before You Begin

To ensure a quick and easy device installation, please read through this section carefully
before attempting to install the device.

WARNING!

Hard drives require careful handling, especially when being transported. If

you are not careful with your hard disk, lost data may result. Always handle your hard
drive and the storage device with caution. Hard drives, like all computer equipment, can
be severely damaged by static electricity. StarTech.com recommends that you wear an
anti-static strap when installing any computer component. If an anti-static strap is
unavailable, discharge yourself of any static electricity build-up by touching a large
grounded metal surface (such as the computer case) for several seconds. Do not bump,
jar, or drop the device. Do not set any liquids near the product: if spilled they could
damage the internal electronics. Do not disconnect any cables or power sources while the
hard drive is active: this can result in data loss and possible damage to the hard drive.
Always make sure that your hard drive is fully spun down before removing the device. 

System Requirements

• IDECASE35U2: An IBM-compatible computer running Windows XP/2000/Me/98 

with an open USB 2.0 port

• IDECASE35F: An IBM-compatible computer running Windows XP/2000/Me/98 or a

Mac computer running OS 8.6 or higher with an open FireWire port

• A 3.5” IDE hard disk drive