StarTech.com LTANCHOR, Quick Start Manual

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: April 15, 2019 10:31 AM

Product Diagram (LTANCHOR)

Note: 

Security Cable and Lock sold separately.

Component

Function 

1

Security Plate

•  Used to hide the 

Mounting Screws

.

•  Used to prevent access to the 

Mounting 

Screws

.

2

Desk Anchor

•  Used in place of a stationary object to secure a 

connected 

Device

.

Requirements

For the latest requirements, please visit 

www.startech.com/LTANCHOR

.

Installation

Notes: 

The 

Desk Anchor

 is not recommend for use in high humidity conditions, on 

glass, ceramic tile, or water absorbent materials. 
The following surface types must have a primer applied before the 

Desk Anchor

 can 

be properly installed: copper, brass, or plasticized vinyl.
For maximum security, it is recommended that both 

Adhesive Backing

 and 

Mounting Screws

 are used when installing the 

Desk Anchor

.

Desk Anchor for Cable Lock

1

1.  Position the 

Desk Anchor

 on the surface you wish to mount it to.

Desk Anchor

Note: 

Use a pencil to draw an outline around the

 Desk Anchor.

 This will ensure that 

you know the area you need to score using the 

Abrasive Pad

.

2.  Use the 

Abrasive Pad

 (included) to score the surface area you intend to mount the 

Desk Anchor

 on. Be careful to only score the surface that the 

Desk Anchor 

will 

cover.

3.  Use the 

Alcohol Pad

 (included) to clean the scored surface prior to installation. 

Allow the alcohol to dry before installing the 

Desk Anchor

 on the surface.

Note: 

(Optional) Use the 

Screw Holes

 on the 

Desk Anchor

 as a guide to drill pilot 

holes.

4.  Remove the 

Adhesive Backing

 on the back of the 

Desk Anchor,

 exposing the 

adhesive surface. Secure the 

Desk Anchor

 to the scored area. Apply the adhesive 

backing to the surface at room temperature 60 Fahrenheit (16 Celsius).

5.  Before connecting a 

Security Cable

 to the 

Desk Anchor, 

allow the adhesive 

backing at least 24 hours to bond to the surface.

6.  Insert the 

Mounting Screws 

(x2) into the 

Mounting Holes

 on the 

Desk Anchor

.

Installing the Mounting Screws 

2