Instruction Manual
10
80
Keyboard test started. Clearing output buffer and checking for stuck
key. About to issue keyboard reset command.
81
Keyboard reset error/stuck key found. About to issue keyboard
controller interface test command.
82
Keyboard controller interface test over. About to write command byte
and initialize circular buffer.
83
Command byte written. Global data initialization done. About to
check for lock key.
84
Lock key checking over. About to check for memory size mismatch
with CMOS.
85
Memory size check done. About to display soft error and check or
password or bypass setup.
86
Password checked. About to do programming before setup.
87
Programming before setup complete. Going to uncompress SETUP
code and execute CMOS setup.
88
Returned from CMOS setup program and screen is cleared. About to
do programming after setup.
89
Programming after setup complete. Going to display power on screen
message.
8B
First screen message displayed. <WAIT...> message displayed. About
to do Video BIOS shadow.
8C
Video BIOS shadow successful. Setup options programming after
CMOS setup about to start.
8D
Setup options are programmed. Mouse check and initialization is
next.
8E
Mouse check and initialization complete. Going for hard disk
controller reset.
8F
Hard disk controller reset done. Floppy setup to be done next.
91
Floppy setup complete. Hard disk setup to be done next.
94
Hard disk setup complete. To set base and extended memory size.
95
Memory size adjusted due to mouse support. Initialization of
different BUSes and optional ROMs from C800 to start.
