Quick-start guide
4
7. Place the cover back onto your computer case.
8. Reconnect the power cable to the back of your computer.
9. Reconnect all of the peripheral devices that you disconnected in step 3.
10.Turn on your computer.
Software installation
Install the driver - Windows
1. Insert the provided driver CD into your computer’s CD-ROM or DVD-ROM drive.
2. Navigate to and open
Device Manager.
3. Under
Other devices
, right-click on the PCI Serial Port device then click
Update
Driver Software.
4. Click the
Browse my computer for driver software
button.
5. Click the
Browse
button.
6. Navigate to your CD-ROM or DVD-ROM location.
7. Select the Windows folder that’s applicable to the operating system running on
the computer. For 32-bit versions of Windows select the
Win2000,XP,2003,Vista,2008,7
folder. For 64-bit versions of Windows select the
WinXP,2003,Vista,2008,7 x64
folder,
then click the
OK
button.
8. Click the
Next
button to complete the installation process.
Install the driver - Mac OS
The card is natively supported by the following Mac operating systems:
• Mac OS 10.11
• Mac OS 10.10
• Mac OS 10.9
• Mac OS 10.8
After the card is installed inside your Mac computer, the drivers will automatically
install.
