Instruction Manual
5
Operation
Front Panel Controls
KVM Control and Status:
(This section is effective only when a multi-port KVM switch module, not included,
is connected.)
• Computer Selection Buttons - Press one of these push buttons to select a computer.
For 16 port models, 1~8 represent the lower 8 ports, while A~H indicates the higher
8 ports. Port 1 and A share the same push button; if port 1 is already selected,
tap its push button to select port A. If port 1 is not selected, press and hold push
button 1 for two seconds to select port A.
• Selected Computer LED Indicator - One of the indicators lights up when the
corresponding KVM port is selected via push buttons, hotkey or OSD menu. The
LED will be steady when 1~8 is selected or flashing when A~H is selected.
LCD Panel Control:
• LCD Power button - Turns on the LCD screen.
• Auto - This button will automatically adjust the best setting for the display signal.
• + / Right Arrow - increases the value of the selected setting in the OSD or moves to
the next item.
• - / Left Arrow - decreases the value of the selected setting in the OSD or moves to
the previous item.
• Enter / Up Arrow - Activates the currently selected setting in the OSD.
