background image

4

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Säkerhetsåtgärder

•  Montering av kabelavslutningar får inte göras när produkten och/eller 

elledningarna är strömförda.

•  Installation och/eller montering får endast göras av behöriga yrkespersoner 

och enligt gällande lokala förordningar för säkerhet och byggnormer.

•  Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så 

sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.

Warning Statements

•  Make sure that you assemble this product according to the instructions.

•  Do not exceed the weight capacity of this product. Overloading this product 

might result in injury or property damage. This product can support the 

following weight: 2320.5lbs (rolling) and 3315lbs (stationary)

•  This product is intended for indoor use only and should not be used 

outdoors.

•  This enclosure is extremely heavy. Never attempt to move or lift this 

enclosure without assistance.

•  Tipping hazard! Extending multiple components from this enclosure 

increases the chance that the enclosure will tip over. To avoid this risk, do not 

extend more than one component from the enclosure.

•  Do not place any items on this enclosure and do not stack the enclosure on 

top of another enclosure.

•  Keep liquid away from this enclosure.

•  Make sure that you install the enclosure in an area that can handle the 

combined weight of the enclosure and the equipment that you intend to 

place inside of the enclosure.

•  This product requires an earth ground connection. Do not use this product 

without an earth ground connection.

Varningsmeddelanden

•  Se till att du monterar produkten i enlighet med instruktionerna.

•  Överskrid inte produktens viktkapacitet. Överbelastning av produkten kan 

orsaka skada på person eller egendom. Denna produkt har stöd för följande 

vikter: 363 kg.

•  Produkten är endast avsedd för användning inomhus och ska inte användas 

utomhus.

•  Detta skåp är extremt tungt. Försök aldrig flytta på skåpet eller lyfta det utan 

hjälp.

•  Risk för vältning! Att förlänga flera komponenter från detta skåp ökar risken 

för att det välter. Förläng inte fler än en komponent från skåpet för att 

Summary of Contents for RK2537BKM






























Reviews: