12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Grounding the LCD Console
Note:
Grounding is recommended in environments with
high levels of electromagnetic interference (EMI), or frequent
electrical surges.
1.
Using a
Phillips Head Screwdriver
, loosen the
Grounding
Connection Screw
.
2.
Attach the
Grounding Wire
to the shaft of the
Grounding
Connection Screw
.
3.
Tighten the
Grounding Connection Screw
, making sure not
to over-tighten.
4.
Attach the other end of the
Grounding Wire
(not connected
to the
LCD Console
) to a proper earth-ground connection.
Connecting the LCD Console
To connect the
LCD Console
to a
Computer
or
KVM
, perform
the following steps:
1.
Turn off the
Computer
or
KVM Switch
.
2.
Connect the
15-pin Host/KVM Connector
on the
KVM
Cable
to the
Host Port
on the
LCD Console
and to a VGA
port and USB port on the rear panel of the
Computer
or
KVM Switch
.
3.
Connect the
Power Cable
to the
Power Connection Port
on
the
LCD Console
and to an
AC Electrical Outlet
.
4.
Power on the
LCD Console
.
5.
Power the
Computer
or
KVM
back on.
