Instruction Manual
3
Installation
WARNING!
Hard drives and storage enclosures require careful handling, especially when being
transported. If you are not careful with your hard disk, lost data may result. Always handle your
hard drive and storage device with caution. Be sure that you are properly grounded by wearing
an anti-static strap when handling computer components or discharge yourself of any static
electricity build-up by touching a large grounded metal surface (such as the computer case) for
several seconds.
Hardware Installation
Hard Drive Installation
1. Firmly press on the rear panel of the enclosure, just above
the USB mini connector (marked by a small triangle). This will
release a small latch on the inside of the side panel.
2. While still pressing on the rear panel, gently yet firmly pull the
side panel off.
3. Place the 2.5” SATA hard drive or SSD into the tray and slide
the drive up to the SATA connector inside the enclosure.
*installation images for reference only