Instruction Manual
6
e)
(optional)
Using an included
Drive Door Key
, turn the
Drive Lock
counter
clockwise to the LOCK position.
Note:
If you are installing more than one drive repeat these steps on the remaining
drive door.
2. Using the included
power adapter
, connect the
Power Adapter Port
on the
S352BU33RER
to an available power outlet.
3. Connect the
S352BU33RER
to your computer system using the included
USB 3.0
cable
or the
eSATA cable
depending on your desired host connection.
4. Set your desired RAID configuration and/or power on the device.
WARNING!
In order to prepare your drives for RAID operation, this enclosure will
configure newly installed drives into your desired RAID configuration. Please be
aware that any data currently on the drives may be lost during this process. It is
recommended that you back up all data prior to setting your RAID configuration.
a) Ensure the
S352BU33RER
is powered off.
b) Adjust the
RAID Control Switch
to your desired RAID configuration. (See list of
RAID configurations)
c) Press and hold the
RAID Mode Button
while turning on the
S352BU33RER
on by
pressing the Power Button.
Note:
RAID configuration is only required for initial configuraiton or if you would like to
change your RAID configuration.
REBUILD