8
Drive Status Indicators
LED
Status
Description
ON
An error has been detected on one or
more hard drive.
OFF
ON
RAID array is currently rebuilding.
OFF
eSATA/USB/FireWire Connectivity
The LED indicators will show which host interface is currently active
on the enclosure. To switch interfaces, shut the enclosure off and
disconnect old cable and then connect the new cable and turn the
enclosure back on. Only one interface can be active at a time, so it is
recommended that only one cable be connected at a time to ensure
the proper interface is chosen.
LED
Status Description
ON
eSATA connection active
OFF
ON
USB connection active
OFF
ON
FireWire interface active
OFF
