Instruction Manual
1
Introduction
The SATDOCK4U3RE USB 3.0 and eSATA Standalone 1-to-3 Hard Drive Duplicator
allows for a single SATA hard drive to be duplicated/cloned on up to three other SATA
drives simultaneously. It can also function as a regular 4-bay hard drive docking station
by connecting to a host computer system. Able to perform 1:3 sector duplication,
including HPA, from a single SATA drive onto three others simultaneously at a rate of
up to 72 MB/s, this duplicator can save time and effort. As an external dock, it can be
connected to your host computer through USB 3.0 or eSATA, providing data transfer
speeds up to 5 Gbps or 3Gbps respectively from the hard drives to your computer
system. Features Quick and Secure Erase functions and support for IDE hard drives with
an included SATA to IDE hard drive adapter (SAT2IDEADP).
Packaging Contents
• 1 x SATA Duplicator Dock
• 1 x USB 3.0 Cable
• 1 x eSATA Cable
• 1 x SATA to IDE Adapter
• 1 x 40-pin IDE Cable
• 1 x 44-pin to 40-pin IDE Cable
• 1 x SP4 to LP4 Power Cable
• 1 x Package of Mounting Screws
• 1 x Universal Power A 3 Power Cords
• 1 x Instruction Manual
System Requirements
• Available USB and/or eSATA* port(s) on computer system
*eSATA port requires Port Multiplier support
• Available AC electrical outlet
• Microsoft
®
Windows
®
2000/XP/Server 2003/Vista/Server 2008 R2/7 (32/64-bit), or
Apple
®
Mac OS
®
X, or Linux
®
*If using USB with the Apple Mac OS operating system, this device will function in USB 2.0 mode only as
USB 3.0 is not currently supported by Apple. eSATA is fully compatible.
