Instruction Manual
2
Introduction
Packaging Contents
• 1x USB 3.0\eSATA 1:5 SATA HDD Duplicator Dock
• 1x USB 3.0 Cable
• 1x eSATA Cable
• 4x Rubber feet (installed)
• 1x Universal Power Adapter (NA / UK / EU)
• 1x Instruction Manual
System Requirements
For Duplication (Duplicator Mode)
• 1x Source 2.5/3.5in Solid State Drive (SSD) or Hard Drive (HDD)
• Up to 5x Destination 2.5/3.5in Solid State Drive(s) (SSD) or Hard Drive(s) (HDD)
For Erasing
• Up to 5x 2.5/3.5in Solid State Drive(s) (SSD) or Hard Drive(s) (HDD)
For Docking Station (PC Mode)
• Computer system with:
• Available USB Port
Or
• Available eSATA Port (Requires Port Multiplier support)
