StarTech.com USBDUPE17, User Manual

Instruction manual

11

3.  Highlight 

Utility

 and press the OK button.

4.  Highlight 

Do Format

 and press the OK button.

5.  Highlight 

FAT16 Format

 and press the OK button.

6.  When the confirmation message appears, press the OK button.
7.  To check the formatting status, progress, and information about the USB flash 

drives, use the UP and DOWN arrows to navigate through the USB flash drive ports.

Format a USB flash drive to FAT32

1.  Use the Power switch to turn on the duplicator and eraser.
2.  Insert USB flash drives into the USB flash drive ports.
3.  Highlight 

Utility

 and press the OK button.

4.  Highlight 

Do Format

 and press the OK button.

5.  Highlight 

FAT32 Format

 and press the OK button.

6.  When the confirmation message appears, press the OK button.
7.  To check the formatting status, progress, and information about the USB flash 

drives, use the UP and DOWN arrows to navigate through the USB flash drive ports.

Set the FAT16 cluster size

1.  Use the Power switch to turn on the duplicator and eraser.
2.  Insert USB flash drives into the USB flash drive ports.
3.  Highlight 

Utility

 and press the OK button.

4.  Highlight 

Do Format

 and press the OK button.

5.  Highlight 

Set FAT16 Cluster Size

 and press the OK button.

6.  Highlight any of the following and press the OK button:

• 

Auto

• 

4KB

• 

8KB

• 

16KB

• 

32KB

• 

64KB