Instruction manual
3
Changing the device settings
In the
Setup
menu, you can change the settings of the duplicator and eraser, including
the button sound, display language, and so on.
Change the startup function
You can select the function that is displayed when you turn on the duplicator and
eraser. By default, the copy function is displayed when you turn on the device.
1. Highlight
Setup
and press the OK button.
2. Highlight
Start-up Menu
and press the OK button.
3. Highlight the function that you want displayed when you turn on the duplicator
and eraser, and press the OK button.
Turn off the audio feedback feature
By default, the audio feedback feature is enabled.
1. Highlight
Setup
and press the OK button.
2. Highlight
Button Sound
and press the OK button.
3. Highlight
OFF
and press the OK button.
Set up the duplicator and eraser
1. Connect the universal power adapter to the Power adapter port on the duplicator
and eraser and to a power source.
2. Use the Power switch to turn on the duplicator and eraser.
3. Press the UP and DOWN buttons to navigate the menu and highlight selections.
4. Press the OK button to make selections.
5. To exit a menu selection, press the ESC button.
For more information about the features and functions of the duplicator and eraser,
see the applicable sections of the manual.
