Service Messages
The Elliptical Edge self-test function monitors the electronics while a workout is in progress. If a malfunction or failure
in a monitored circuit occurs during a workout, the "Needs Service" message displays (as described in Display
Maintenance Mode), and a specific service message is set. Service message can be accessed and viewed from the
Service Settings Mode.
To view Service Messages:
•
On entering the Service Settings Mode, press the
"S" key while in "service settings". "Service message" will dis-
play in the upper information display.
•
Press the "Scroll" key to view service messages (if any have been set). Pressing and holding the "Scroll" key
will advance through all service messages.
•
Press the "Enter" key to exit Service Messages and return to the Service Settings Mode.
The following service messages may be set by the self-test function:
MESSAGE
DEFINITION
No Communication
A communication failure has occurred between the upper display and the Load Control
Board (LCB). Communications cable or LCB replacement may be required.
No Alternator Output
The alternator is not producing an output voltage (the unit will not provide a
load/workout to the user). Alternator, load resistor or alternator cable harness replace-
ment may be required.
Alternator Field Open
The alternator field has an open circuit. Alternator, alternator cable harness or LCB
replacement may be required.
No Load
The alternator is working, but the unit is not providing a load (workout) to the user. Al-
ternator cable harness or LCB replacement may be required.
Low Battery
The battery charge voltage is low. This may be a result of low usage. The battery can
be recharged either by operating the machine by connecting the external wall-powered
power pack and the machine is in use for several hours. With the machine not in use
the recharging of the battery will take 24 hours to reach full charge.
NOTE:
If the "Low Battery" message is set frequently, battery replacement or charging
system service may be required.
Elliptical Edge Service Manual
3.7
Summary of Contents for Elliptical Edge
