• If the supply chord is damaged, it must be replaced by the manufacturer, service agent
or similarly qualified person in order to avoid a hazard. The replaced power cord should
be provided by manufacturer or seller.
• If the plug or cord is damaged, please call after-sale service centre.
• There is a fire risk if cleaning is not carried out in accordance with the instructions.
• In case of a damaged connecting wire, please refer to the manufacturer, after-sale
service personnel or other qualified technicians.
• Use the unit according to the instructions to avoid fire hazard.
• The exhaust air must be not be introduced into a smoke flue or chimney that is used
for exhausting fumes from appliances burning gas.
• Follow the local laws applicable for external air evacuation.
• There shall be adequate ventilation of the room when the range hood is used at the
same time as appliances burning gas or other fuels.
• There is a fire risk if cleaning is not carried out in accordance with the instructions.
• Do not flambé under the range hood
• The air must not be discharged into a flue that is used for exhausting fumes from
appliances burning gas or other fuels.
Use-
Speed adjustment. See Fig 9
• Press Stop button, the motor will stop running.
• Press the Low (speed) button, the motor runs
at low speed
• Press the Mid (speed) button, the motor runs
at mid speed
• Press the High (speed) button, the motor runs at high speed.
• Press the Light button, the 2 lighting lamps will come on.
Press it again and the lamps will be turned off.
Maintenance-
The cleaning of the carbon grease filter mesh-
The filter mesh is made of high density aluminium. Please do not use corrosive detergent for
cleaning. The proper function of the unit is conditioned by the regularity of the maintenance.
Please strictly follow the guidelines below:
Method 1: Put the mesh into 40-50°C warm, soapy water and soak for about 2-3 minutes.
Wear gloves and clean with a soft brush. Please do not apply too much pressure, as the mesh
is delicate and can be damaged easily.
Method 2: The filter can be cleaned in the dishwasher, set the temperature at around 60°C.
