18
Fault
Possible Cause
Solution
Yellow flame
The holes in the flame spreader
are clogged
Clean the flame spreader.
Refer to ‘Cleaning and
Maintenance’
Different gas is used
Check the gas used is
correct
Gas leakage
Stop using the appliance
and close any functioning
burners. Open a window
to ventilate and contact
a registered CORGI gas
safe engineer by the use
of a neighbours phone or a
mobile phone.
Note: Do not switch on/off
any electrical appliances
including lights. Gas can
have the smell of rotten
garlic or eggs.
Gas smell
Fuse Cover
Fuse Replacement (Class I)
This appliance must be eathed. Remove the fuse cover
with a small flat head screw driver. Take out the fuse
and replace with a new fuse of the same Amp. Replace
the fuse cover and push back into place.
MAINS PLUG FUSE REPLACEMENT