10
6. Lift the door off the hinge pin and
place in a safe place where it will
not get damaged
7. Remove the bottom bushing and
bottom bushing cap and fit them
on the opposite side (Fig 4).
8. Unscrew the bottom hinge (Fig 5).
9. Remove the levelling foot and fit on the
opposite side (Fig 6).
10. Screw the bottom hinge on the opposite side
loosely (Fig 7).
11. Carefully slide the door on to the
bottom hinge pin.
12. Screw the top hinge loosely (Fig 8).
13. Check the fridge door is
aligned horizontally
and vertically so that
the seals are closed
on all sides.
14. Tighten the top hinge.
Use a spanner to
tighten it if necessary
(Fig 9).
5.
6.
7.
8.
9.
15. Put the top cover back and screw
it into place securely (Fig 10).
16. With the door closed, check that the door is
aligned horizontally and vertically and that
the seals are closed on all sides before finally tightening the bottom
hinge (Fig 11).
10.
