EN
14
PREFACE
Thanks for purchasing the Staufenbiel Cheetah.
The construction of the model and the detailed solutions related subject to a certain taste dependen-
cy. Therefore, the solutions to these instructions are to be understood as a suggestion. There are
certainly other options and approaches. In some alternatives is therefore received during the building
specifications, but does not shown on the pictures.
PLEASE READ THIS INSTRUCTIONS CAREFULLY!
Use a hobby knife with #11 Blade to cut the
covering from the area above the aileron servo
mounting position.
THE WINGS
1
Use a soldering iron to open the holes for the
center pins and the servo cable.
2
Prepare two 50cm Sevo extension cable and
two with 10cm lenght that will be left in the fu-
selage and make the completion easier.
3
