EN
15
Attach the extension cable to the string and pull
the cable through the wing.
4
Cover the aileron servos with heatshrink tube.
Sand the parts that will be glued lightly with 80
sandpaper.
5
Enlarge the outermost hole to 1.8 mm. Set the
servo to neutral and fasten the servohorn.
6
Connect the servo to the extension cable and
glue the servo with CA in the hole of the servo-
mount.
7
Align the position of the servohorn to the ruder-
horn and mark it with a felt-tipped pen.
8
