5 Operation
SPR-PRC-H
27 / 33
www.stauff.com
5.5 Rechargeable battery charging
1
2
3
Fig. 19: Hand grip
1 Locking key
2 Operating display
3 Rechargeable battery
At the latest when the LED display of the battery is red,
( Section 3.7.2, P. 16) the rechargeable battery then needs to be re-
charged.
A replacement battery is included in the scope of delivery. To
stop interruptions to operations, the recommendation is to
immediately charge any flat rechargeable battery.
u
This is the way to charge the rechargeable battery:
1. Ensure that the operation display does not light up and that, as a
result, the machine is switched off ( Section 5.2, P. 23).
2. Connect the charger to the power supply.
3. On the machine, release the locking key of the rechargeable battery
and remove the battery.
4. Place the rechargeable battery into the charger.
þ
The red charging pilot lamp flashes during the charging.
1. Wait until the light of the charging pilot lamp is steady.
ü
The rechargeable battery is now fully charged.
2. Disconnect the charger from the power supply.
3. Remove rechargeable battery and insert into the machine such that
its clicking into place is audible.
