5 Operation
SPR-PRC-H
23 / 33
www.stauff.com
5.2 Switching on/off
1
2
3
Fig. 14: Button on the operating panel and on the hand
grip
1 Power switch
2 Push button
3 Return button
Switch on machine
u
Switch on the machine as follows:
1. Ensure that the pressure adjustment wheel on the underside of the
machine is on Step „1“.
2. Press power switch on the operating panel at the back.
ü
The cycle and maintenance display light up green for 1 second.
ü
Depending on the charging state, the battery display a steady light in
green or orange.
3. Make certain the operating lamp on the hand grip displays a steady
light.
þ
The machine is ready-to-operate.
Machine switch-off
u
Switch off the machine as follows:
1. Keep actuating the return button until the pressure cylinder is fully
retracted.
2. Set the pressure adjustment wheel on the underside of the machine
to Step „1“.
3. Press power switch on the operating panel at the back.
ü
The LED displays on the operating panel light up red for 1 second.
4. Make certain the operating lamp on the hand grip is off.
5. Depending on the battery charging state, connect the machine to the
charging station and charge the rechargeable battery.
6. Put the machine in the case if it is to be transported or a lengthy
storage is planned.
þ
Switching off is ended.
