Machine for cutting ring pre-assembly and final assembly
10 / 72
2 For your safety
• acquire the regulations applicable to the machine in their most recent
version and to familiarise personnel working on the machine with these
• provide personnel with the required personal protective equipment
• carry out a safety instruction
• ensure sufficient ventilation and lighting of the work areas
• collect any floor contamination using suitable means and dispose of
these observe the safety data sheet for the production equipment
used
2.4 Personnel qualification
Any
work on the machine may only be carried out by qualified and
authorised personnel. Personnel instructed, trained or briefed in the work
involved is considered to be qualified. This has to be backed up by
appropriate certificates and records.
A distinction is made in this manual between the following groups
of persons:
•
Operating personnel
are those who have been verifiably briefed in
the operation and function of the machine. They input the data
required for the operation and carry out the required operating steps to
operate the machine. They are also responsible for simple
maintenance work and troubleshooting as specified in the inspection
and maintenance schedule and in the troubleshooting instructions.
•
Personnel learning on the job
may only work on the machine under
the constant supervision of personnel qualified for this work.
2.5 Personal protective equipment
The following personal protective equipment is mandatory for those
working on the machine:
Wear close-fitting work clothes!
Wear safety boots!
