Machine for cutting ring pre-assembly and final assembly
12 / 72
2 For your safety
2.7 Safety devices
Safety devices protect operating personnel against hazards.
Before each startup of the machine, all safety devices have to be fitted
correctly and in working order.
Safety devices may only be removed when the machine has stopped and is
protected against being accidentally switched on again by means of a
padlock or a similarly suitable measure.
The following safety devices are attached to the machine or have to be
fitted by the operating company:
Electrical main switch
The electrical main switch is located at the
front of the machine. The electrical main
switch de-energizes the entire machine
(position: 0). The electrical main switch is
secured against reactivation
Light curtain
Light curtains prevent personnel from
reaching into the hazard area of the
machine. If anyone reaches into the hazard
area during operation, the respective light
curtain will trigger an emergency stop. This
stops all machine movements.
Emergency stop button
Pressing the emergency stop button
triggers an emergency stop resulting in all
machine movements being stopped.
To reactivate the machine, the triggered
emergency stop has to be unlocked
(Establishing readiness for operation after
emergency stop).
1
Light curtain
1
2
3
2
Electrical main switch
3
Emergency stop button
Fig. 1: Safety devices
