6 Operation
SPR-PRC-POC
43 / 72
3. Confirm the assembly type selection with the
Confirm
button.
The
Setup > order
menu opens.
The selected assembly type is displayed.
If the
Manual pressure input
assembly type is selected,
no assembly parameters, which means there is no system
check for assembly. This will invalidate the liability by
Walter Stauffenberg GmbH & Co. KG. The data can be viewed
after assembly. Please refer to
6.8.2 Setting the material
How to set up the material:
1. In the
Setup > order
menu, press the
Material
button.
The
Setup > material
menu opens.
Fig. 46: Menu – Setup > material
2. Select the material by pressing the corresponding button.
3. Confirm the material selection with the
Confirm
button.
The
Setup > order
menu opens.
The selected material and associated size are displayed.
6.8.3 Setting the production quantity
How to set up the production quantity:
1. In the
Setup > order
menu, press the production quantity button.
The input pad for entering the quantity opens.
