6 Operation
SPR-PRC-POC
55 / 72
Fig. 63: Job completed
2. In the
Processing order
menu, press the
Setup
button.
For additional settings, refer to chapter 6.8, p. 41
6.13 Final assembly in fitting body
For final assembly in the fitting body, follow the detailed instructions –
depending on the selected assembly type – in the assembly instructions
in the STAUFF Connect product catalogue.
6.14 Cleaning the machine
The machine and its components have to be cleaned after each use.
How to clean the machine:
1. Use a cotton cloth to clean the surfaces.
2. For cleaning the control panel, switch off the control panel
(Setting up the system properties).
3. Use water with a grease-dissolving, non-caustic cleaning agent.
Do not allow any moisture to get into the cylinders.
