2 For your safety
Machine for cutting ring pre-assembly and final assembly
8 / 72
2 For your safety
To avoid accidents and injuries, …
• follow all safety instructions and warnings in these operating instructions
• observe hazard, prohibitory and instruction signs
• follow the accident prevention regulations and directives applicable at
the place of operation
• observe all inspection and maintenance intervals
• ensure to comply with the intended use
2.1 General safety instructions
Safety instructions help you in avoiding injuries and damage. Ensure
that you have read and understood all the safety instructions in these
operating instructions.
Safe working entails doing more that just reading the general safety
instructions in this chapter. Also read and follow the specific safety
instructions in each chapter affecting your work. Also observe
information in the referenced product documents.
The following general safety instructions apply to all work undertaken
on the machine:
• Observe the applicable national and international health and
safety regulations.
• Only operate the machine …
– in a technically satisfactory condition
– taking into account safety and hazards
– according to the intended use
– in compliance with this operating manual and
– with all safety devices unchanged, properly installed and
functional
• Wear the appropriate personal protective equipment for all work
on the machine chapter 2.5, p. 10.
• Observe all safety markings affixed to the
machine chapter 2.6, p. 11.
• Work on electrical equipment may only be carried out by
Walter Stauffenberg GmbH & Co. KG.
• Immediately eliminate any malfunctions which affect your safety
and/or reliable operation of the machine. Take the machine out
of service until the fault is rectified.
• Components – except tools – may only be replaced by
Walter Stauffenberg GmbH & Co. KG.
