6 Operation
Machine for cutting ring pre-assembly and final assembly
22 / 72
6.2 Switch on the machine
If the machine signals “Wrong turning direction” after switching
on, the phase reverser in the power supply has to be reversed.
How to switch on the machines:
1. Turn the electrical main switch to “I / ON”.
The
Unlocking
menu appears after a few seconds.
The
Ready/Process runs
lamp flashes.
The message
Release emergency stop and confirm with
“Acknowledge”
appears.
Fig. 7: Start screen
The English start screen appears at the first startup after
machine delivery.
2. Press the
Globe
button to set the language.
The
Language settings
menu opens.
Fig. 8: Menu – Language settings
3. Press the button for the language to be set.
The language set appears at the top of the menu; this means the
language is set.
