7
It is totally manual depending on the user how long he intends to keep it on or off. The display will
be as shown below. Use the knob to reach the desired lamp and turn it on or off manually.
The next option is the Settings option. The LCD will display the sub categories as shown below.
Use the knob to move to the INFO option, and it displays the information related to this DLC
Controller, manufacturer, Year of manufacturing etc.
Door Switch : Move the cursor bar to reach the door switch option. Single click to edit the setting
as “Enable” or “Disable”
Wifi Setting : Use the knob to reach the Wifi Settings option. Single click to edit the setting as
“Enable” or “Disable”
SPECIFICATIONS
Dimensions
200 x 255 x 95 Cm
Materials :
PVC - 100 % Shock Proof
Power Source :
230 V
Frequency :
50/60 Hz
Power Consumption : 60 Watt
Control Panel
Consist of the following :
1.
Microprocessor based control panel with
LCD Display
.
2.
Individual Lamp run hours for timely and easy replacement.
3.
Individual lamp On/Off/Error Indicator.
4.
Over Current Protection Circuit.
5.
Lamp change reminder on Display.
6.
Suitably rated RCBO for ON/Off of incoming Mains power
Safety
The operation of the UV lamp shall be interlocked through AHU door
panel lock and shall be independent of the AHU operation. The system
shall be interlocked with the AHU door panel so that it will be ON ONLY
WHEN AHU DOOR IS CLOSED and OFF when AHU DOOR IS