3
First Time Use
9.0
Dealer Assistance 9.1
During first time use by the client, it is advised that the dealer or service technician
assists and explains the set-up to the customer (the user and/or the attendant). If
needed, the dealer can make final adjustments.
User Testing 9.2
It is important that the customer is fully aware of the installation, how to use it, and what
can be adjusted in order to gain as much mobility as possible. As a dealer, proceed
as follows:
Explain and show the customer how you have executed the installation, and explain the
function of the hardware.
If needed, adjust the hardware to the proper position.
Explain to the customer possible problems and how to address them.
Conditions of Use 9.3
The ADI hardware is intended for use as installed by the dealer, in accordance to the
installation instructions in this manual.
The foreseen conditions of use are communicated by the dealer or service technician
to the user and/or attendant during the first time use.
If the usage conditions change significantly, please contact your dealer or a qualified
service technician to avoid excessive wear and tear or unintended damage.
The CF back may not fit every chair. Please consult your clinician or supplier providing
your equipment.
CAUTION
Do not attach the CF back with the user in the chair.
CAUTION
Do not use CF backs during vehicle transportation.
CAUTION
Protect the CF back from blunt force shocks that may cause damage and/or breakage.
CAUTION
If you are able to fold the back canes, the CF back should be in the folded position when
transporting the wheelchair, especially before loading for air travel.
