3
Mounting
8.0
Armrest Mounting
8.4
To mount an armrest with clamps:
1.
Loosely thread screws through clamp plate (7) into base plate (8).
2.
Position armrests tube between clamp.
3.
Tighten screws (6) with a 3/16” hex key until the hardware firmly clamps onto the
armrest tube.
To mount an armrest with a Permobil track:
1.
Lightly thread screws through the four holes on the hardware into track nuts (9).
2.
Slide track nuts (9) into Permobil armrest track and tighten screws with a 1/8” hex key
until the hardware firmly clamps on the armrest track.
To mount 3/4” stem rod with ARM240 hardware:
1.
Slide rod into tube clamp.
2.
Tighten the two socket head screws (10) with a 3/16” hex key until the hardware firmly
clamps the rod.
To mount 3/4” stem rod with a ratchet handle (11):
1.
Slide the rod into the tube clamp.
2.
Tighten ratchet handle (11) until the hardware firmly clamps the rod.
3.
Permobil and Invacare specific hardware comes in 5/8” & 7/8” size rods.
NOTICE
To prevent electronics and sensitive devices from damage, keep area clear
when swinging rod away.
