Installation Instructions
9.0
9
Joystick Installation
9.4
The
Multi Joystick
can be mounted on your wheelchair using several different mounting systems.
The following instructions are for mounting to the Power Chin Boom. Please refer to the installation
section of the manual for your specific mounting system to learn how to install the Micro Joystick on
other Stealth products.
CAUTION
Only install this product to wheelchairs onto which the
manufacturer allows installation of third party parts.
CAUTION
All wheelchair electronics must be switched off during installation.
CAUTION
The
Multi Joystick
is a Class I Medical Device (MDR 2017/745). All accessories,
including switches, must also be compliant with MDR 2017/745.
WARNING
Install the interface unit with the connectors facing downwards. This
alignment will help ensure that water does not enter the interface.
•
Define the position of the joystick. When the jack connections are at the right hand side, a
forward movement of the joystick will result in forward movement of the wheelchair.
•
If needed, you can change this positioning in steps of 90° with the mo-Vis Configurator
Software.
•
Place the Mounting Ring around the joystick housing.
•
Secure the Quick-to-Mount (Q2M) Half Clamp to the Mounting Ring.
•
Use an Allen wrench to mount the 20mm bolt.
•
Slide the unit over the Q2M Rod provided with your package, or any other 6mm rod, to
position the Micro Joystick on the wheelchair.
•
Place and secure the Interface Unit and all cabling on the wheelchair.
