R-Net™ Setup
11.0
20
Throw
11.6
The
Throw
is the place where the joystick is stopped in a particular direction.
Throw
Distance
is the maximum distance/angle the shaft can be moved in a particular
direction. The throw should be set to the maximum distance/force the person using it is
capable of.
Active Throw
•
Follow the first three steps in
Section 11.4.
•
Use the navigation's
Up & Down
buttons to select
Active Throw
from the list and press the
Right
button. Select
Port
with
Up & Down
button then
Right
again to set up.
•
System will guide you through the setup, following the on-screen instructions, have the end
user move the joystick towards the defined direction with the maximum force possible. Press
the
Plus
+ button to save and proceed to the next step. Values range from 25% to 100%.
Throw Details
Throw Details
will allow you to see all
Active Throw
setups for all profiles. To select profiles, use
Navigation Buttons (
Left
or
Right
)
and to select axis use (
Up or Down
)
. The selected profile/
axis can be adjusted in increments of 1 or 10, using the
Plus & Minus
±
buttons. For increments of
10, press and hold the
Plus
+ or
Minus
- buttons. Values range from 25% to 100%.
3.
With the navigation buttons, navigate to
Controls
Joystick
. Here you can fine tune joystick
performance and functionalities, such as:
▪
Active Throw Details
▪
Active Orientation and Orientation Details
▪
Deadband
