R-Net™ Setup
11.0
21
Axis Orientation
11.7
Axis Orientation allows you to switch the axis behavior. For example, the X-axis
(Forward
/
Reverse
)
can be switched, making the
Forward
direction
Reverse
, and vice versa.
Active Orientation
•
Follow the first three steps in
Section 11.4
.
•
Use the navigation's
Up & Down
buttons to select
Active Direction
from the list and press
the
Right
button. Press
Plus
+ for
Port 1
or
Minus
- for
Port 2
to select the port to set up.
•
System will prompt you to set the
Forward (X-axis)
by angling the joystick. Automatically,
Reverse
will be set at the direction opposite the one selected. Values available are N (North/
Forward, W (West/Left), S (South/Reverse, or E (East/Right).
•
The next prompt will ask you to set the
Left
(Y-axis) by angling the joystick. Automatically
Right
is assigned to the value opposite the one chosen. Values are the same as in the previous
step.
•
Power Cycle the Chair
Orientation Details
Orientation Details
is similar to
Throw Details
, but it sets the direction of proportional controllers
listed in each profile. Values are set as
Yes/No
to
Invert Forward/Reverse (InvFR)
or
Left/Right (InvLR)
.
To swap axis, change value on SWAP row either
Yes/No
. Power cycle the chair when finished.
