background image

Never use a chest harness without a positioning belt. Positioning belts and supports should only be
used to help support the user’s posture. The belts, posture supports and straps must be snug, but must
not interfere with the user’s breathing. Check to make sure the user cannot slide down in the seating
system, as they may suffer chest compression and may suffocate due to pressure from the belts or
harnesses.

A seat with angle or built-in contours may help prevent the user from sliding in the seat.

Due to the possibility of a user sliding while in-chair, unsupervised use of anterior thoracic support
devices could pose a serious choking hazard. Continually ensure that the user is sitting upright and that
the thoracic support device does not obstruct the user’s breathing in any way.

These devices do not conform to ANSI/RESNA WC20 or SAE J2249 and are not designed or approved
to provide restraint or protection in the event of a crash. Wheelchair users should transfer to a vehicle
seat and use the vehicle seat belt system or a child safety seat that complies with federal safety
standards. The wheelchair should then be stored and secured in the vehicle.

Children weighing less

than 48 lbs. must always transfer to an approved child safety seat.

Before you install or begin using any product from

Stealth Products’ Stealth Positioning™

line, it is

important that you read and understand the content of these installation and operating instructions.
Product misuse due to failure to adhere to instructions and warnings in this document will void your
warranty and may result in property damage, injury or death. Always keep the operating instructions in
a safe place so they may be referenced as necessary. If this document contains information you do not
understand or if there are concerns about safety or operation, contact your provider.

All information, pictures, illustrations and specifications are based on the product information available
at the time of printing, and are representative examples. They are not intended to be exact descriptions
of the various parts of the product. Instructions are written with the expressed intent of use with
standard configurations.

They also contain important safety and maintenance information.

For

assistance with advanced configurations or options, contact your provider or

Stealth Products

at (512)

715-9995 or toll free at (800) 965-9229.

Immediately discontinue use if any function is compromised, if parts are missing or loose or if any
component shows signs of excessive wear.

Consult with your provider for repair, adjustment or

replacement. You can download additional copies of this manual by visiting https://stlpro.site/stealth-
docs/ and searching for “Stealth Positioning” in the document manager.

Our products are designed, manufactured, and produced to the highest of standards. If any defect in
material or workmanship is found,

Stealth Products

will repair or replace the product at our discretion.

Any implied warranty, including the implied warranties of merchantability and fitness for a particular
purpose, shall not extend beyond the duration of this warranty.

Stealth Products, LLC

does not warrant

damage due to, but not limited to, misuse, abuse, or misapplication of products and modification of
product without written approval from

Stealth Products, LLC

.

Any alteration or lack of serial number, where applicable, will automatically void this warranty.

Stealth

Products, LLC

is liable for replacement parts only.

Stealth Products, LLC

is not liable for any incurred

labor costs. No person is authorized to alter, extend, or waive the warranties of

Stealth Products, LLC

.

To learn more about our warranty and returns policy, please visit https://stlpro.site/returns-n-warranty.

Stealth Products

is committed to 100% customer satisfaction. Your complete satisfaction is important

to us. Please contact us with suggestions or feedback to help us improve the quality and usability of
our products.

You may reach us at:

Important

Warranty

About Us

P72D625R2 IFPB IFU.afpub

Oct 28, 2022

Stealth Products, LLC

104 John Kelly Drive,
Burnet, TX 78611

Phone: (512) 715-9995 Toll Free: (800) 965-9229

Fax: (512) 715-9954 Toll Free: (800) 806-1225

info@stealthproducts.com - www.stealthproducts.com

MDSS GmbH

Schiffgraben 41
30175 Hannover, Germany

SODIMED SA

Chemin Praz Devant 12
1032 Romanel sur-Lausanne, Switzerland

UK Authorized Representative

MDSS-UK RP

6 Wilmslow Road, Rusholme
Manchester M14 5TP, United Kingdom

Summary of Contents for Stealth Positioning Pelvic Belts

Page 1: ...ient s pelvis to maintain a neutral position to the degree possible for each client A properly positioned pelvic support may Help stabilize the pelvis which directly affects seated body alignment Aid in the prevention of sacral sitting unsafe and non functional postures skin breakdowns and increased pressure on bony prominences Increase postural stability decreasing the effort needed to sit Facili...

Page 2: ...seat rail Thread the belt around the wheelchair tube in the correct location as shown above Thread the belt around the wheelchair tube in the correct location as shown above Tri end is attached using a fastener and a hole in the seat rail then thread the belt through the Tri end and D Clip as shown above NOTICE Ensure that the webbing is routed properly through the belt anchor and does not slip wh...

Page 3: ...logo on the buckle housing This will disengage the locking mechanism Step 2 Pull gently on the male side of the buckle while holding the push button It should release and separate from the housing Make any adjustments to the belt as necessary Step 3 To reattach the buckle slide the male side of the buckle back into the housing A audible click should occur indicating that the belt is secure If the ...

Page 4: ...n with the expressed intent of use with standard configurations They also contain important safety and maintenance information For assistance with advanced configurations or options contact your provider or Stealth Products at 512 715 9995 or toll free at 800 965 9229 Immediately discontinue use if any function is compromised if parts are missing or loose or if any component shows signs of excessi...

Reviews: