12
Maintenance
Cleaning
•
Use a soft cloth to clean the back shell.
•
Ensure all cleaners are approved for finished steel, aluminum, plastic, and
upholstered surfaces.
•
Hand wash the foam pad cover with mild, soapy water or detergent, rinse well,
and let dry.
•
Foam pad should NOT get wet.
•
A brush with soap and water can be used to remove any dirt and debris that
may become lodged in the zipper teeth.
To wash the covers of the laterals:
•
Remove the pad/cover from the lateral; and,
•
Machine wash in cold water on delicate cycle and drip dry.
Fabric care instructions can be found on the covers on the cushions and back.
Disinfection
•
Wipe gently with a cloth dampened with a household disinfectant.
•
Allow foam to air dry thoroughly.
CAUTION
Exercise caution when removing the back to avoid
punctures, tears, or other damage to the fabric or foam.
Be careful not to catch hair, wires or other
items when zipping and unzipping the covers.
WARNING
DO NOT immerse foam in water.
DO NOT Bleach. DO NOT tumble dry. DO NOT Iron.
DO NOT hand wash in water temperatures above 160°F (70°C).
Maintenance
These care and guideline instructions will keep the hardware and covers in good
condition for a longer period of time and prevent damage.
•
Check and tighten all fasteners on a regular basis. Do not overtighten the
fasteners.
•
Check pad/covers for any breakdown.
•
Repair or replace parts as needed.
•
Gently remove dust and dirt from hardware with a damp cloth as necessary.
