2
Mounting
8.0
Standard Track Mounting
8.1
To adjust standard track mounting:
1.
Insert the 1/4-20 x 3/4 Socket Head Screws (F) through the counter bore holes
(G) and into the threaded holes of the Universal Track Nut (H).
2.
Tighten with a 3/16 T-Handle to 200in-lbs of torque.
Do not over-tighten
screws.
3. The 1/4-20 x 1/4" set screw (I) does not usually need to be adjusted. If the lateral
is not swinging back into position, loosen the set screw to ensure it is not
causing interference.
Standard Cane Mounting
8.2
To adjust standard cane mounting:
1. Insert the 1/4-20 x 3/4 Socket Head Screws (J) into the male tube clamp
through the counter bore holes and into the female side of the tube clamp.
2. Attach lateral by using 1/4-20 x 3/4 Socket Head Screws and mounting directly
to the cane clamp.
3. Tighten with a 3/16 T-Handle to 200in-lbs of torque.
Do not over-tighten.
(
J
)
(
F
)
(
H
)
(
G
)
(
I
)
Summary of Contents for The World's Best Laterals
Page 14: ...a NOTES 11 0 ...
Page 15: ...b NOTES 11 0 ...
