2
10
Operating Instructions
3. Attach hose and accessories (
).(Hose and accessories need to be purchased separately.)
3. Set the ON/OFF switch to the ON position and allow the tank
pressure to build. Motor will stop when tank pressure reaches
cut-out pressure.
4. Turn the air pressure regulator knob clockwise until desired
pressure is reached.
5. The compressor is ready for use.
1. Close the tank drain valve (1
2. Plug-in the power cord(2)(
)
(
)
How to start
1
OF F
ON
Fig K
How to shut down
1. Set the ON/OFF switch (1) to the OFF position.
2. Unplug the power cord (2).
.
3. Reduce the pressure in the tank through the outlet hose. Pulling the
safety valve ring (3) and keeping it open will also reduce the pressure
in the tank (
the
).
3
1
Fig L
1. Set the ON/OFF switch (1) to the OFF position
2. Turn the air pressure regulator knob (1) counter-clockwise until it stops
Before each start-up
Fig J
(
).
(
).
Fig H
1
Fig I
OFF
AUTO
I
OFF
AUTO
OFF
2
Summary of Contents for 3332081
Page 14: ...14 Exploded View...
